Stucco & Wood Carbide Tipped Hole Saw
*The Hole Saw with 2" Drilling Depth Standard, 4" (100mm) shank (M16 Thread), 6 x 105mm
(1/4"x105mm) or 10 x 105mm (3/8"x105mm) Carbide Tipped pilot masonry drill bit, ejection
spring designed for rapid cutting and fast plug removal of holes in masonry and wood and
composite materials.
* The Carbide Tipped Hole Saw quickly bore holes in stucco, brick, plaster and lath, plywood
sheathing, clay pipe, Hardie cement board, wood, non ferrous materials, aluminum siding, hard
or composite plastic. Engineered with a unique tooth design and using premium grade tungsten
carbide tips, the hole cutters are able to withstand the demands of cutting through masonry
while maintaining a cutting edge that cuts effectively through hard and soft wood, plywood,
OSB, and chipboard.
* The extra deep 2" cutting depth is great for thick multilayer surfaces such as stucco or brick
over OSB or thick plaster over wood. The thread mounting of the cutter head on the 4" shaft
enables the tool to withstand hard use in the toughest materials for hole after hole. Use with
any ½" corded or cordless drill (hammer drills OK if hammer action is turned off).
* Includes TCT hole saw, 4" shaft, 6 x 105mm (1/4") or 10 x 105mm (3/8") Carbide Tipped pilot
masonry drill bit, ejector spring, hex wrench, and sturdy plastic storage tube.
1.) Single bit is engineered to bore holes in both wood and masonry;
2.) Carbide Tipped pilot masonry drill bit use:
From 3/4" (19mm) to 1-7/8" (48mm) use 6 x 105mm (1/4" x 105mm) drill bits;
From 2" (51mm) to 6" (152mm) use 10 x 105mm (3/8" x 105mm) drill bits.
3.) The slots and holes q'ty on the hole saw both sides:
From 3/4" (19mm) to 1-7/8" (48mm): 2 holes on the hole saw both sides
From 2" (51mm) to 2-1/2" (64mm): 3 holes on the hole saw both sides
From 2-3/4" (70mm) to 6" (152mm): 4 holes on the hole saw both sides
4.) Hard and durable RA90 TCT tungsten carbide tipped cutting teeth;
5.) 2" cutting depth for thick stucco, brick, metal siding;
6.) Ejection spring for easy removal of the cut plug;
7.) Works with any ½" corded or cordless hand drill;
Size:
Size
|
Teeth
|
Size
|
Teeth
|
3/4" (19mm)
|
5
|
2-3/8" (60mm)
|
11
|
7/8" (22mm)
|
6
|
2-1/2" (64mm)
|
12
|
1" (25mm)
|
7
|
2-3/4" (70mm)
|
12
|
1-1/8" (29mm)
|
7
|
3" (76mm)
|
13
|
1-1/4" (32mm)
|
8
|
3-1/4" (83mm)
|
13
|
1-3/8" (35mm)
|
8
|
3-1/2" (89mm)
|
14
|
1-1/2" (38mm)
|
9
|
3-5/8" (92mm)
|
14
|
1-5/8" (41mm)
|
9
|
4" (102mm)
|
16
|
1-3/4" (45mm)
|
9
|
4-1/8" (105mm)
|
16
|
1-7/8" (48mm)
|
9
|
4-5/8" (118mm)
|
16
|
2" (51mm)
|
10
|
5" (127mm)
|
24
|
2-1/8" (54mm)
|
10
|
5-1/4" (133mm)
|
24
|
2-1/4" (57mm)
|
10
|
6" (152mm)
|
24
|
|